Ashleyharwood

5/8" arbor hole. * 8 inch diameter * 350 grit * includes self-aligning spherical washers This wheel is for customers who are not concerned about having a radius edge, it offers more flat area on both the surface and sides than any of our other wheels. The wheel edge is covered with CBN material and is a full 1.5 inches wide and 8-inches in diameter. The side faces are a full 1-inch of CBN material! Because we use 6061 Aluminum this beast of a wheel only weighs in at 4 lbs, 10 oz. The stone wheels that come with most grinders weigh 3 lbs, 7 oz – so this wheel, while being massive, only weighs about one pound more.

MegaSquare Wheel

11c18d67-8309-4a96-93c0-c8bbc991192a_OYVw_r6Tj.jpg

Version 1

MegaSquare Wheel — Ashley Harwood Woodturning - Turning Native LLC

0139659d-acf8-49b0-9bfe-1f783f7ec8fd_wpP0Aim3D.jpg

This bolster fits onto the AH handles, and is made to accept a 3/4“ diameter tool, such as the Ashley Harwood Finisher bottom bowl gouge that you can also find on this webpage. This bolster is precision machined- offering both a secure and safe attachment when tightened onto the handle and an easy way of removing the tool from the handle, without allen keys or set screws. Simply glue the tool into the bolster using epoxy, or your preferred adhesive, and you're ready to turn. Also compatible with SB Tools Handles (However, SB handles do not allow for tool storage inside). Handles sold separately. Made in the USA. I have been selling woodturning tools consistently since I began teaching in 2011. My tool business is home grown and self funded. I only sell the tools that I believe to be the very best for my students and customers and I stand behind my products 100%.

AH 3/4" Bolster

861c5fcb-9615-47fb-b3c6-d928e0e2a93c_ZMjpLCXIF.jpg

I’m excited to announce my newest tool addition - Both an angle setting jig and a wrench. Use the Angle Wrench to set consistent angles for sharpening your tools. Takes the guesswork out of your bevel angles. It features: 40 degrees (I use this angle for a 40/40 grind on my Push Cut gouges) 20 degrees (I use this angle for my negative rake scrapers or vortex tool) 50 and 60 degrees (I use these angles for my Finisher bottom bowl gouge) Magnets hold it onto the platform so that your hands are free to make adjustments. To set the angle, face the number you want towards you. The number you are looking at is the one you get. Or stick it to your lathe bed and use it to tighten or loosen your AH handle system. Introductory pricing- won’t stay this way forever! Designed by Ashley Harwood Made in the USA I have been selling woodturning tools consistently since I began teaching in 2011. My business is home grown and self funded. I only sell the tools that I believe to be the very best for my students and customers and I stand behind my products 100%.

AH Angle Wrench

629684f9-87da-4392-9f02-6c00972c3755_s2dtdqWtP.jpg

Available now! This is my new, patent pending negative rake scraper system. The double ended scraper provides two different profiles, and the magnetic handle makes it easy to switch between blades with no set screws or allen keys required. And don’t worry, the magnets don’t touch the blade, so the blade will not become magnetized. Great for bowl turning and spindle turning projects. Curved/Skewed blade: -10V steel -11” long, 1 1/4” wide -20 degree bevel angles on each side -Curved profile on one end, left hand skewed profile on the other Swept Back/Skewed blade: -10V steel -11” long, 1 1/4” wide -20 degree bevel angles on each side -Swept back profile on one end, right hand skewed profile on the other Handle: -Two part magnetic handle -6” long - meant for negative rake scraping, where very little leverage is required -curved ergonomic design -provides easy and quick interchange of blades and removal for sharpening, if necessary -level on top reminds the user to keep the tool level while in use -compatible with both Swept Back/Skewed blade and Curved/Skewed blade Blades and Handle Made in the USA, designed by Ashley Harwood